Domestic Pumps
Peripheral Electric
Light Duty Monobloc
Centrifugal Contra Impellers
Light Duty Multistage
Self Priming Jet c/w Ejector
Self Priming Jet AISI 316
Closed Coupled Monobloc
Electric Gear Pump
Swimming Pool Filtered
Pressurisation Sets c/w Jet
Phone: 01293 533 665
Email: enquiries@thepumpco.co.uk
 
This series of electric self prime close coupled pumps has the characteristic of the nozzle and venturi being housed in the pump body. The fluid generated by the impeller is passed only in part to the outlet, the remaining fluid is recycled by means of the venturi system which is connected within the pump body. This allows the self prime function.
At the first starting, it is enough to fill the pump body with the liquid that, circulating through the venturi, transfers the air from the suction to the delivery, ejecting it through the delivery piping.
Therefore the vacuum which is generated makes the liquid go up along the suction piping, allowing the prime function.
The presence of the venturi system enables these pumps to be insensitive to the presence of air into the pumped liquid.
Self Priming capabilities
Pump available with pressurisation sets
Single phase motors with a built in thermal overload protection on request, the capacitor is permanently in circuit
Motor protection to IP44 (available in IP55 upon request).
Winding insulation to class F
Standard voltage: 230V- 50Hz single phase, 230V/400V- 50Hz three phase.
Other voltages and frequencies available upon request
General water supply, pressurization of water by using pressure vessels (autoclaves), horticultural irrigation, mist irrigation, dairy and farm applications.
Water transfer and garden watering applications.
Note: it is generally advisable to fit either a non-return valve or foot-valve to the suction.
Capacities up to 3.6 m3/hr
Heads up to 48 meters.
Liquid quality required: clean free from solids or abrasive substances and non aggressive
Maximum Temperature of pumped liquid -15°C to 50°C
Maximum ambient temperature 40°C For higher temperatures please contact the sales office
Maximum working pressure 6 bar
The tolerances of the hydraulic features are according to UNI / ISO 2548 - Class C, Appendix B, electric features according to C.E.I.
The working features listed in the catalogue are based on continuous service for clear water with a specific weight of 1000kg / m3.
Manometric suction lift up to a max. of 8÷9 meters.
Pump body in AISI 304 stainless steel, motor support in die cast aluminium. Impeller/diffuser in thermoplastic resin, on request in s/s, seal retaining disc in AISI 304 stainless steel.
Mechanical seal in graphite/ceramic.
Rotor shaft in stainless steel fitted with seal for life bearings.
Totally enclosed fan cooled motor (TEFC).
       
The Pump Company Limited, 22 The Bell Centre, Newton Road, Crawley, West Sussex, RH10 9FZ
Tel: (0)1293 533665. Fax: (0)1293 533664 Registered in UK 3428736