Industrial Pumps
Positive Displacement
Self Priming Centrifugal
End Suction Centrifugal
Robuschi Process (ATEX)
AISI 316 Closed Impeller
AISI 316 Open Impeller
AISI 316 Vortex Impeller
AISI 316 Channel Impeller
AISI 316 CC Closed Impeller
AISI 316 CC Open Impeller
AISI 316 CC Vortex Impeller
Cast Iron Closed Impeller
Vertical Cantilever
Grundfos Industrial
Cast Iron losed Coupled NB
Cast Iron Long Coupled NK
Inverter Closed Coupled NBE
Inverter Long Coupled NKE
3M
Sealless Magnetic Drive
Thermoplastic/Chemical
In-line Pumps
Dosing Pumps
Multistage
Hygienic
Borehole/Submerged
Air Operated Pumps
Phone: 01293 533 665
Email: enquiries@thepumpco.co.uk
 
Centrifugal Pumps are the most common and well-established pumps on the market. They come in many different models and can transfer fluids with high efficiency over a wide range of flows and pressures.
The pumps of the HG-HGA series are close coupled centrifugal pumps with open impeller suitable to convey liquids containing solids in suspension, non-falamentous, even viscous and containing gases. This series of pump together with the HG (open impeller) and RS (vortex) versions were designed to meet difficult applications needs with reduced costs.
These pumps have the same dimensions as DIN 24256 series. The pumps simple and modular design together with their versatility of use are at the basis of the huge success of this series. All available models can be equipped with different kinds of seals: single, double, back to back, flushed, cooled, or gland packing.
Available in many different configurations:
HG - HGA: Close-Coupled with standard electric motor
HGV - HGVA: Vertical column
Simple and modular construction
Impellers and other components are obtained through precision casting guaranteeing high efficiency and low NPSH values
Mechanical parts common to RD and RG series
The HG pumps (flanged type) have the same dimensions as DIN 24256 series
Various shaft sealing options available
Construction & General Industry
Aviation
Chemical & Petrochemical
  Pharmaceutical
Food Industry
Textile Industry
Maximum flow rate: 140 m3/h
Maximum head: 65 mwc
Maximum Temp: -35 to +180 Deg C
Series HG - HGV: Flanged unions UNI PN 16
Series HGA-HGVA: DIN 11851 unions (food applications)
Standard: AISI 316L
On request: Sanicro 28, other steels
       
The Pump Company Limited, 22 The Bell Centre, Newton Road, Crawley, West Sussex, RH10 9FZ
Tel: (0)1293 533665. Fax: (0)1293 533664 Registered in UK 3428736