Industrial Pumps
Positive Displacement
Self Priming Centrifugal
End Suction Centrifugal
Robuschi Process (ATEX)
AISI 316 Closed Impeller
AISI 316 Open Impeller
AISI 316 Vortex Impeller
AISI 316 Channel Impeller
AISI 316 CC Closed Impeller
AISI 316 CC Open Impeller
AISI 316 CC Vortex Impeller
Cast Iron Closed Impeller
Vertical Cantilever
Grundfos Industrial
Cast Iron losed Coupled NB
Cast Iron Long Coupled NK
Inverter Closed Coupled NBE
Inverter Long Coupled NKE
3M
Sealless Magnetic Drive
Thermoplastic/Chemical
In-line Pumps
Dosing Pumps
Multistage
Hygienic
Borehole/Submerged
Air Operated Pumps
Phone: 01293 533 665
Email: enquiries@thepumpco.co.uk
 
Centrifugal Pumps are the most common and well-established pumps on the market. They come in many different models and can transfer fluids with high efficiency over a wide range of flows and pressures.
The pumps of the RS-RSA series are close coupled centrifugal pumps with vortex impeller suitable to convey foreign matters and lints in suspension whose dimensions could be up to 60% of the outlet port diameter. According to the assembly either open closed or vortex impeller can be installed.
The pumps simple and modular design together with their versatility of use are at the basis of the huge success of this series. All available models can be equipped with different kinds of seals: single, double, back to back, flushed, cooled, or gland packing.
Available in many different configurations:
HD - HG - RS: Close-Coupled with standard electric motor
HDV - HGV - RSV: Vertical column
Simple and modular construction
Impellers and other components are obtained through precision casting guaranteeing high efficiency and low NPSH values
The RS pumps (flanged type) have inlets distance between centres in accordance with DIN 24256 or DIN 24255 depending upon pump size
Pump suitable to convey foreign matters and lints in suspension whose dimensions could be up to 60% of the outlet port diameter
Various shaft sealing options available
Various connections on request (SMS, Clamp etc)
Construction & General Industry
Aviation
Chemical & Petrochemical
Pharmaceutical
  Food Industry
Textile Industry
Sewage
Maximum flow rate: 130 m3/h
Maximum head: 65 mwc
Maximum Temp: -35 to +180 Deg C
Series HD - HG - RS: Flanged unions UNI PN 16
Series HDV - HGA - RSV: DIN 11851 unions (food applications)
Standard: AISI 316L
On request: Sanicro 28, other steels
       
The Pump Company Limited, 22 The Bell Centre, Newton Road, Crawley, West Sussex, RH10 9FZ
Tel: (0)1293 533665. Fax: (0)1293 533664 Registered in UK 3428736