Industrial Pumps
Positive Displacement
Self Priming Centrifugal
End Suction Centrifugal
Thermoplastic/Chemical
Process Pumps
Long Coupled Magnetic Drive
Close Coupled Magnetic Drive
Long Coupled Mech Seal
Close Coupled Mech Seal
Heavy Duty ISO 2858
Vertical Shaft Driven Sump
Horizontal Close Coupled
Service Pumps
Basic Small Magnetic Drive
Light Duty Magnetic Drive
Route Dry Run Mag Drive
Route Mechanical Seal
Close Coupled Mech Seal
Vertical Sump
Vertical Short Well
Self Priming Trolley Mounted
In-line Pumps
Dosing Pumps
Multistage
Hygienic
Borehole/Submerged
Air Operated Pumps
Phone: 01293 533 665
Email: enquiries@thepumpco.co.uk
 
The AM magnetic drive pumps have been developed on the structure of the old TM range in order to meet in a better way the market's requests.
Centrifugal pumps , horizontal, close-coupled, built using reinforced thermoplastic polymers, internal structure in ceramic oxides, high density carbon, fluorinated elastomers.
No contact between liquid and metallic parts is forseen.
Static O-ring - The drive magnetic system finally excludes any type of rotating seal. The only seal needed is a static O-ring in the connection between volute & rear casing
Special solutions and employed materials allow occasionally dry running operation, avoiding any damages inside with internal structure R (starting from 15 min. up to many hours in function of working conditions)
R-X: two sets of constructive materials for many applications from clean water to waste and slightly abrasive liquids, strong alkali or the salts such sodium hypochlorite, acids as chromic, nitric, sulphuric etc
Standard or P (powered): Two executions able to work at max. capacity transferring fluid with specific gravity low-medium (1.05-1.35 kg/dm³) or medium-high (1.35-1.8 kg/dm³)
Powerful magnet assembly in Neodymium-Iron-Boron
Industry
Chemicals and aggressive liquids
  Water Handling
Petrochemical
Max Head – 12m
Max Capacity – 16m³/hr
  Max Temperature – 110 Deg C
Available Motor Power – 0.18-0.55 kW
Parts in contact with liquid: PP+glas – E-CTFE + Carbon Fibres
Guide bushing: Carbon HD – SiC
Shaft: Ceramic
OR gasket: FKM
Screws: AISI 304
Flange: Stainless Steel
       
The Pump Company Limited, 22 The Bell Centre, Newton Road, Crawley, West Sussex, RH10 9FZ
Tel: (0)1293 533665. Fax: (0)1293 533664 Registered in UK 3428736